All the downloadable material is available in the DOWNLOAD AREA

• 

  GS360-GS1920 (Possibility to realize actuators machined from solid in carbon steel too, the painting details and colours are on demand)

• 

  GD15-GD480

• 

  GS15-GS240

• 

  GD720-GD3840

• 

  GS360-GS1920

• 

  GD720-GD3840 (Possibility to realize actuators machined from solid in carbon steel too, the painting details and colours are on demand)

• 

  GS360-GS1920 (Possibility to realize actuators machined from solid in carbon steel too, the painting details and colours are on demand)

• 

  GD15-GD480

PrevNext

Stainless Steel Actuator Performances

Special scotch yoke design that gives an increased torque and the seat break out point.

• Bush steel alloy and Scotch yoke steel alloy : use of steel, ensures high wear resistance to the  internal mechanism and consequent longer working life.
• Compact design with reduced overall dimension allows an easy handling & minimal air ( energy ) consumption.
• Special compound seals and guide on the sliding pistons, ensures self lubrication for life.
• The special double on one sealing rings grants a longer life maintenance free without O-ring sticking and replacement.
• Internal bores are fine lapped for lower friction and perfect piston sealing end increases the life of the sliding parts.
• Maintenance free for the full actuator working life.
• Stainless steel drive shaft , body end caps , to protects the actuator against the environmental corrosion.
• Shaft anti-blowing system. The driving shaft/lever construction avoids any possible expulsion of the shaft.
• Standard stroke adjustment.
• Atex 94/9/CE for suitability of the equipment intended for the use in Potentially Explosive Atmosphere.

Actuator Nominal Torque: from 15 Nm to 3840 Nm.
Mounting flange according with DIN/ISO 5211, DN 3337: F03 - F05 - F07 - F10 - F12 - F14 - F16 
NAMUR standard pressure connection.
Rotation angle: 92° ( -1°+91° ).
Stroke Adjustment: 10° ( special adjustment on request )
Nominal pressure: 5,6 bar; maximum operating pressure 8,4 bar.
The torque is directly proportional to the operating pressure.
For the simple acting ( spring return ) actuators the reverse torque is performed only by the spring action, and is
independent from the operating pressure.
Temperature: from -20°C to +80°C ( special version on request ).
Operating media: compress filtered air not necessarily lubricated ( for temperature under 0°C use dry air ) .
In case of lubricated air , use non-detergent oil compatible with NBR rubber.
All the models are available in double acting "GD" and simple acting "GS" version.
AISI 316  Cylinder - Caps
AISI 303  Shaft ( aisi 316 on request)
Water proof IP68